Tenda TEG1124P-24-250W 24-Port Gb Switch With 24-Port PoE

182.44

Born for Surveillance 6KV Port Lightning Protection Maximum PoE Output Power 225W Cache Optimizaion One-Key VLAN 6KV Lightning Protection PoE Switch In real projects,APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged.Tenda TEG11 series switches have professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture. CCTV, Standard, VLAN and Isolation Operation Modes Offered Standard: The switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. CCTV: The port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. VLAN: Ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively Isolation: Ports 1 to 12 and ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. 225W PoE power supply simplified wiring Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras. Standard and protocol: IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab / IEEE 802.3x / IEEE 802.3af / IEEE 802.3at Switching capacity: 48Gps Dimensions: 440 * 178 * 44mm Interfaces: 24 10/100 / 1000Base-T ports (Data / Power) Lightning protection ≥6KV 4k MAC address table PoE through pin 1 2 4 5 / 3 6 7 8 – Input voltage: 100-240V 50 / 60Hz Max PoE power: 225W Modes: CCTV / VLAN

Open in winkel

Barcode: 6932849431445 SKU: 31475815231 Categorie:

Beschrijving

Born for Surveillance 6KV Port Lightning Protection Maximum PoE Output Power 225W Cache Optimizaion One-Key VLAN 6KV Lightning Protection PoE Switch In real projects,APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged.Tenda TEG11 series switches have professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture. CCTV, Standard, VLAN and Isolation Operation Modes Offered Standard: The switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. CCTV: The port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. VLAN: Ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively Isolation: Ports 1 to 12 and ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. 225W PoE power supply simplified wiring Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras. Standard and protocol: IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab / IEEE 802.3x / IEEE 802.3af / IEEE 802.3at Switching capacity: 48Gps Dimensions: 440 * 178 * 44mm Interfaces: 24 10/100 / 1000Base-T ports (Data / Power) Lightning protection ≥6KV 4k MAC address table PoE through pin 1 2 4 5 / 3 6 7 8 – Input voltage: 100-240V 50 / 60Hz Max PoE power: 225W Modes: CCTV / VLAN

Bijkomende informatie

Winkel

Merk

Tenda