DrayTek Wireless Access Point with Power over Ethernet Dual-LAN support

105.98

Vigor AP-810 Wireless Access Point The DrayTek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system (see details here). The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform. Wireless Security The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access. For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required. The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data/devices. USB Printer Port The AP-810 has a USB interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-810, or a PC anywhere else on the network to which the AP-810 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-810s to make a bridge. WMM – WiFi Multimedia The AP-810 implements intelligent wireless traffic prioritisation for the most efficient management of wireless traffic by using the Wi-Fi Multimedia standard (WMM). WMM defines Quality of Service (QoS) in Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS standard, intended to improve timing critical applications such as audio, video and voice applications over WiFi. WMM adds prioritised capabilities to Wi-Fi networks and optimises their performance when multiple concurrent applications, each with different latency and throughput requirements, compete for network resources. WPS – WiFi Protected Setup Wireless Security (encryption) is important to protect your data (privacy) but also to prevent unauthorised people from accessing your network or your Internet connection. The WPS system means that instead of having to create and enter long encryption keys, you can activate WPS registration. To activate, you press and hold the WPS button, then activate the WPS function on your PC; the two devices then automatically exchange encryption keys. For security, WPS an be disabled if the AP-810 is physically accessible. The same button on the AP-810 also serves as a physical on/off switch for the Wireless LAN if you wish to quickly disable it at any time, whilst still leaving your wired ports active. Features • Business-class 802.11n WLAN access point. • Manageable by DrayTek Wireless Management. • PoE (Power-over-Ethernet) as standard. • Dual isolated LAN interfaces. • 4-Port Ethernet Switch. • Detatchable Antennae – Can be replaced with uni-directional or higher-gain. • Wireless Encryption : WEP, WPA, WPA2. • Repeater/Bridge/Access Point/Station Modes. • Wireless Client Isolation. • Bandwidth management per SSID. • 802.1q VLAN Tagging (two subnets/VLANs). • Up to four distinct SSIDs (for VLANs). • MAC Address Filtering. • Optional USB Thermometer. • Radius / WPA User Authentication. • 802.1x User Authentication. • WDS (Wireless Distribution System). • WMM (Wireless MultiMedia). • WPS – WiFi Protected Setup. • Built-in Site Surveyor. Networking, Connectivity & Ports Model      Form-Factor      Device Type    N/A Compatible Internet Connections      Network Connectivity    10/100/1000 Wireless LAN Network Ports      Other Connectors    1 x USB USB Applications      Wired Protocols      Total LAN Connections    4 Total WAN Connections      64 Bytes L3 Forwarding Performance      512 Bytes L3 Forwarding Performance      Wireless Wireless Speed    N/A Wireless Protocols    IEEE 802.11a IEEE 802.11b IEEE 802.11g Wireless Band    Single Band Frequency    2.4 GHz Operation Channel      Wireless Transmitter Power    N/A Antenna      Core Features Features      Router/Modem Processor      Internal RAM Memory      Internal RAM Memory Type      Internal Flash Memory      LED Indicators      Buttons      OS Support      Max. Power Consumption      PSU Type      Security & VPN Security Protocols    Hidden SSID WEP WPA WPA2

Open in winkel

Barcode: 4712909124539 SKU: 30047299323 Category:

Description

Vigor AP-810 Wireless Access Point The DrayTek Vigor AP-810 is a standalone wireless access point, ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS features. It can also be used as part of the DrayTek managed wireless system (see details here). The AP-810 replaces our popular AP-800 model, adding full compatibility with our managed wireless platform. Wireless Security The AP-810 features multiple levels of wireless security. Encryption using WEP, WPA, WPA2 (802.11i) is available you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access. For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP-810 setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required. The Vigor AP-810 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether its different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data/devices. USB Printer Port The AP-810 has a USB interface into which you can connect a regular printer. That printer is then accessible from any wireless or wired PC which connects to the AP-810, or a PC anywhere else on the network to which the AP-810 is connected. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of AP-810s to make a bridge. WMM – WiFi Multimedia The AP-810 implements intelligent wireless traffic prioritisation for the most efficient management of wireless traffic by using the Wi-Fi Multimedia standard (WMM). WMM defines Quality of Service (QoS) in Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS standard, intended to improve timing critical applications such as audio, video and voice applications over WiFi. WMM adds prioritised capabilities to Wi-Fi networks and optimises their performance when multiple concurrent applications, each with different latency and throughput requirements, compete for network resources. WPS – WiFi Protected Setup Wireless Security (encryption) is important to protect your data (privacy) but also to prevent unauthorised people from accessing your network or your Internet connection. The WPS system means that instead of having to create and enter long encryption keys, you can activate WPS registration. To activate, you press and hold the WPS button, then activate the WPS function on your PC; the two devices then automatically exchange encryption keys. For security, WPS an be disabled if the AP-810 is physically accessible. The same button on the AP-810 also serves as a physical on/off switch for the Wireless LAN if you wish to quickly disable it at any time, whilst still leaving your wired ports active. Features • Business-class 802.11n WLAN access point. • Manageable by DrayTek Wireless Management. • PoE (Power-over-Ethernet) as standard. • Dual isolated LAN interfaces. • 4-Port Ethernet Switch. • Detatchable Antennae – Can be replaced with uni-directional or higher-gain. • Wireless Encryption : WEP, WPA, WPA2. • Repeater/Bridge/Access Point/Station Modes. • Wireless Client Isolation. • Bandwidth management per SSID. • 802.1q VLAN Tagging (two subnets/VLANs). • Up to four distinct SSIDs (for VLANs). • MAC Address Filtering. • Optional USB Thermometer. • Radius / WPA User Authentication. • 802.1x User Authentication. • WDS (Wireless Distribution System). • WMM (Wireless MultiMedia). • WPS – WiFi Protected Setup. • Built-in Site Surveyor. Networking, Connectivity & Ports Model      Form-Factor      Device Type    N/A Compatible Internet Connections      Network Connectivity    10/100/1000 Wireless LAN Network Ports      Other Connectors    1 x USB USB Applications      Wired Protocols      Total LAN Connections    4 Total WAN Connections      64 Bytes L3 Forwarding Performance      512 Bytes L3 Forwarding Performance      Wireless Wireless Speed    N/A Wireless Protocols    IEEE 802.11a IEEE 802.11b IEEE 802.11g Wireless Band    Single Band Frequency    2.4 GHz Operation Channel      Wireless Transmitter Power    N/A Antenna      Core Features Features      Router/Modem Processor      Internal RAM Memory      Internal RAM Memory Type      Internal Flash Memory      LED Indicators      Buttons      OS Support      Max. Power Consumption      PSU Type      Security & VPN Security Protocols    Hidden SSID WEP WPA WPA2

Additional information

Winkel

Merk

Draytek